Bells/Noise Makers

- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting

Don't let the half-pint stature fool you, Mirrycle's little Incredibell Brass Solo packs the beautifully resonant ring of solid brass. Its compact size and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and it rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

"Ding, ding, ding! Passing on your left." The timeless design and clear tone of the Courtesy Bell Classic is a fun way to be a better bike path citizen. Its elegant all metal construction and sophisticated good looks will get you noticed.

The Timber Model YEW bell is designed to alert other nearby trail users of your presence. Using a spring-loaded on/off switch, the bell can be turned on, ringing activated by the bikes motion, or it can be silenced when not needed. The Timber bell offers a friendly way to warn other trail users of your approach. - Spring loaded piston on the on/off lever for smoother shifting - Fits 35mm bars (includes shims for standard 31.8mm and 22.2mm bars) - A hinge pin in the bar clamp provides easier mounting and secure holding power

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm (.87-inch) outside diameters. - Dome Diameter: 44mm (1.6")

Drawing inspiration from Raijin, the Japanese God of Thunder, the Incredibell Raijin boasts a remarkable sound level exceeding 85 db., ensuring you're heard loud and clear. Crafted with exceptional quality at the forefront, every bell is a dedication to durability and superior performance. The Raijin with its ingeniously designed dinger can be rotated to any position. This gives you great flexibility in mounting the bell anywhere on your handlebar, making it convenient to use either your thumb or another finger to ring the bell. Fits 22.2 or 25.4mm bar.

Medium sized bells with exciting and classic designs to fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!

Add some flair and fun to kids' bikes with MSW Squeeze Horns. - Fits standard 22-26mm diameter handlebars - Approximately 3" wide

Powder-coated black brass bell that produces a loud, clear, and pleasant sound to alert pedestrians. - Split clamp allows the bell to be installed anywhere on the handlebar without removing grips or shifters. - Fits 22.2 to 28.6mm handlebars - Size: 35mm - Material: Brass

Let everyone know your coming with Sunlite's Candy Mini Bell. It comes in a variety of colors to match your bike and gives you a resounding "ping." It fits most bars and can be used right or left handed.

Origin-8's Time Clock Bell provides a wonderful sound and adds a touch of class to your handlebars. This great 55mm bell delivers the wonderful resonate sound of brass with all-metal mechanical parts.

- 65mm Bell in the form of a bacon cheese burger - Adjustable handlebar mount - Universal nylon mount - Ringer style mechanism - Function: Lever

- Alloy lever action safety bells perfect for kids bikes - Sturdy alloy construction with an adorable insect or animal on top

Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Origin-8's Ping Streamliner features a compact design and a clamp that fits 25.4-31.8mm handlebars.

Let everyone know your coming with Sunlite's I Love My Bike Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

•Lightweight, compact design •Easy-read compass •Alloy construction

•Classic Bugle design •Clamp fits most handlebars

- Great novelty horn - Fits most handlebars

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Medium sized Bells with exciting and classic designs and fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!

Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.

Classically designed bicycle bell featuring modern materials and a robust machined-aluminum handlebar mount. The bell dome and striker are crafted from high-quality brass with a sturdy stainless steel spring. Its secure base quickly mounts to most modern bicycle handlebars (25.4mm or 22.2mm diameter) with a stainless steel Torx bolt. And its narrow design attaches neatly between other handlebar accessories. It provides a powerful ring that’s excellent for all cyclists and commuters alike. This bell is engineered to be extremely durable with excellent resistance to weather-related wear-and-tear. This lightweight and stylish ringer is the ultimate bicycle bell. - Compact, classic bell-shape construction for a high-quality sound - Bell and striker are made from high-polished brass - CNC-machined aluminum hard handlebar mount, designed for 25.4 - 22.2mm tube - Molded rubber shims add grip and fine tune fitting - Stainless steel hammer - Impressively loud ring - Weight: 34g

The Omnibell has an adjustable band clamp. Its ingeniously designed dinger can be rotated to any position. This gives you flexibility in mounting the bell anywhere on your handlebar, making it very convenient to use either your thumb or another finger to ring the bell. Dome Diameter: 34mm (1.34") Fits handlebars with 22mm – 31.8mm (.87" to 1.25") outside diameters