Pedals

Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

- Plastic nylon molded body - Chromoly spindle - 318g pair

- One-piece ABS resin body - Non-slip rubber surface - Boron spindle - 388g pair

- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair

- Nylon body w/steel cage - Chromoly spindle - Toe clip compatible (clips included) - 547g pair - 9/16-inch pedals

- One-piece resin body - Chromoly spindle - Toe clip compatible - 366g pair

- Forged aluminum body - Chromoly spindle - Non-slip studs - Toe clip compatible - 529g per pair (9/16-inch)

- One-piece nylon body - Chromoly spindle - Toe clip compatible - 407g pair

- Nylon body and anodized aluminum cage - Chromoly spindle - Quick flip cage design - Toe clip compatible - 288g pair - 9/16-inch

- Aluminum body and cage - Chromoly spindle - Shimano SPD compatible - Toe clip compatible on non-SPD side (included) - 760g per pair

Plastic test ride pedal for Turbo Active bikes. - Platform Dimensions: 87mm Length x 106mm width - 9/16" Spindle. - 6mm Allen Key fitting on spindle for installation. - Sand paper grip pad on pedal platform.

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

The Shimano Deore XT Explorer Dual-Platform Pedals combine the efficiency of the SPD system and the convenience of a platform pedal, all in a lightweight package. - One side SPD, one side platform - Two-sided flexibility and performance - Ideal for trekking - Customize the entry and release tension settings - 392 grams - Concave cleat clearance on platform side - High-grip pins - Sealed cup and cone bearings

With a wide contact area, the PD-ME700 pedals let riders focus on the trail ahead. Designed to work seamlessly with SHIMANO AM series shoes, the SPD trail pedals deliver enhanced stability over rough terrain. FEATURES - Wide, dual-sided platform improves pedal-to-shoe stability and power transfer - Integrated cage increases control when not clipped in and protects binding mechanism from impacts - Robust retention claws provide smooth engagement and release - Rider adjustable entry and release tension for individual customization - Chrome-moly spindle and low-maintenance sealed bearing cartridge axle

PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes

These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals. - Weight: 533 grams (pair)

Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings. - 352 grams (pair)

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform. - 17mm thick at center - 105mm wide - Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach

Dimension City Pedals. - Built-in reflectors, will not accept toe clips - Molded nylon; 1-piece, caged-type pedal - Slip-resistant surface

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

Dimension Mountain Sport Pedals. - Molded nylon pedal body - Accepts toe clips - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly - Weight: 290g

Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years

Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.

The Stamp 1 Gen 2 pedals build upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement. Crafted with an uncompromising commitment to quality, the updated Stamp 1 boasts a robust nylon composite body and inherits the tried-and-true internals from the award-winning Stamp 7 flat pedals, keeping you supported lap after lap. - Thin, concave profile - 13.5mm to 15.5mm pedal body height - One-piece replaceable traction pins, 10 per pedal - Upgraded, fully serviceable IGUS bearings and seal system - Forged SCM 435 Chromoly Steel spindle - Optimal size-specific surface area - Platform dimensions: 114 x 114mm - Large recommended for shoe sizes: 10-15 (US M) // 43.5-49 (EU)

Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep these pedals spinning smooth. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams

Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)

Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris. Slim Convex Profile Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support. Extra Grip Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized. Formed with Purpose The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer. Reliable Performance Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Precision Machining Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.

Waveform Pedals are designed for all-mountain riding, from XC to downhill. Available in two different sizes, proportionally scaled to provide a supportive platform that's shaped to match the footprint of your shoe. They have a slim, dual-concave profile that is 14mm thick at the perimeter and just 12.5mm thick in the center, cradling your foot for optimal pedal feel. Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions. - Proportionally designed platform, shaped to match shoe profile - Slim, concave profile with large tapered leading edge to deflect pedal strikes - 3 low friction, fully sealed cartridge bearings and 1 Igus bushing per pedal - V-ring rotary seal to protect against contamination - 11 stainless steel, rear-loading pins per side (pins 4.5mm tall), includes 6 extra grip pins - Fully serviceable with a set of hex keys, no special tools needed - Large Platform: 112mm x 106mm